General Information; General Instructions; G20111; Operating The Unit - TREVIDEA g3ferrari RIBERA PRO Manual Del Usuario

- Use original spare parts and accessories only.
- Do not subject the product to strong impacts, serious
damages may result.
- Do not use near or under flammable materials (like
curtains), heat, cold spots and steam.

GENERAL INSTRUCTIONS

Before using the unit for the first time, carefully wash the
parts that come in touch with food such as the arm, filter,
container, juicer spout and cones.
Before operating the juicer, make sure to place it on a flat
and stable surface with no heat sources nearby. Assemble
all parts properly before use.
Always place a container under the spout when operating.
To avoid the overheating of the motor, do not use the
appliance for more than 5 minutes continuously, then wait
at least 5 minutes before operating.
Never leave the appliance unattended while it is running.
Disconnect the electric plug from the socket after each
use.
Do not immerse the motor unit in water or other liquids;
clean it with a damp cloth.
G20111 DESCRIPTION
A) Arm
C) Filter
E) Spout

OPERATING THE UNIT

- Unroll the power cord from the base (G). Insert the juice container (D) in its housing.
- Place filters and juicing cones correctly.
- Make sure that the spout (E) is in the open position.
- Place a glass or a container under the spout.
- Connect the electric plug to the power outlet.
- Cut a citrus in half and place it on the juicing cone.
- Press over the citrus with the proper arm (A).
This appliance is suitable to squeeze any type of citrus. It is equipped with two cones (B): a big one with a
wider base for large fruits like oranges and grapefruit and a smaller one suitable for lemons or small oranges.
B) Double juicing cone, small and big
D) Container
F) Motor body G) Base with power cord housing
9