Overview; Assembly - Thuasne Rollator Quatro Manual

Overview

1. Seat
2. Hand brake
3. Fixation screw for height
adjustment of the handgrips
4. Cross tube
5. Rear wheel with brake
independent from tire
pressure
6. Castor wheel
7. Shopping basket
8. Tray
9. Stick holder
10. Folding lock

Assembly

When delivered in packing material the Quatro Marathon rollator should be assembled in
the following way:
1. Remove the rubber plugs and plastic bag;
2. If there is a horizontal tube between the back wheels, you have to remove it. It
serves transport issues.
3. Put the wheels on the ground
4. Pull the under frame in your direction and push the cross tube (Fig. 1) down.
5. Stick the grip tubes in the frame.
Each grip tube must be sticked
minimum 10 cm in the frame. The
maximum height adjustment is marked
on the grip tubes with the words „MAX."
or „Security" and has to be kept.
(Fig. 2)
The hand grips shall not be adjusted
turned outside. They must be parallel to
the walking direction.
8
1
6
7
"SECURITY
" or "MAX."
16
2
9 4
3
10
5