General Control; Display Brightness Control - Sharp HT-SB350 Manual De Manejo

General control

HT-SB350(W)
HT-SB350(BK)
ENGLISH
To turn the power on
Press the ON/STAND-BY button.
The standard mode LED indicator lights up. If the power does
not turn on, check whether the power lead is plugged in
properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
The STAND-BY indicator turns red.

Display brightness control

Press the DIMMER button to adjust the brightness of the display
and sound mode indicator.
Sound mode indicator and display bright
Sound mode indicator and display dim
Sound mode indicator and display off. Pressing
any button will light up the display for 3 seconds only.
Volume auto fade-in
If you turn off and on the unit with the volume set to 40 or higher,
the volume starts at 20 and fades in to the last set level.
E-15
HT-SB350_A6_EN_UK.fm
All manuals and user guides at all-guides.com
2010 August 16
Volume control
Unit operation:
Press volume up (VOL. +) to increase
the volume and press volume down
(VOL. – ) to decrease the volume.
Remote control operation:
Press the VOLUME + button to increase the volume and the
VOLUME – button to decrease the volume.
Muting
The volume is muted temporarily when pressing
the MUTE button on the remote control. Press
again to restore the volume.
Preset sound mode
Main unit operation:
When the SURROUND button is pressed, the current mode
setting will light up. To change to a different mode, press the
SURROUND button repeatedly until the desired sound mode
lights up.
Remote control operation:
Press a desired sound mode on the remote control.
WOW HD is on for nominal effect.
STANDARD
WOW HD on for cinema/game sound effect
CINEMA/GAME
WOW HD on for sport broadcasting
SPORT
WOW HD on for news
NEWS
00 01 02 ..... 59 60