Hot water
Cautions
•
During heating, there may be drops of water dripping from the pressure release
hole of the multifunction valve. This is a normal phenomenon. lf there is a large
amount of water leak, please contact customer care center for repair. This
pressure release hole shall, under no circumstances, be blocked; otherwise, the
heater may be damaged, even resulting in accidents.
•
The drainage pipe connected to the pressure release hole must be kept sloping
downwards.
•
Since the water temperature inside the heater can reach up to 75 C, the hot
water must not be exposed to human bodies when it is initially used. Adjust the
water temperature to a suitable temperature to avoid scalding.
•
Unscrew the thread screw on the multifunction safety valve, and lift the drain handle
upwards (See Fig. 7) to drain the water from the inner tank.
lf the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or related qualified person in order to avoid a hazard.
•
This appliance is not intended for use by persons(including children)with reduce
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been give supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Power suppl y cord
j
Cold water
(Fig.6)
16
p ressure ralease hole
(Fig.7)
°