Digital Display; Use - Wilfa BALANCE Manual De Instrucciones

BURRS
EN
• Remove the bean cup to access the burrs. Once the bean cup has been
removed, pull up the handle on the top burr, and twist it anti-clockwise to
release. Use the included brush to clean the burrs if needed.
• Place the top burr and twist it clockwise to lock it. Make sure to put the
handle down before placing the bean cup.

DIGITAL DISPLAY

The digital display allows you to set desired grind time.
• Use the start/stop button to start and stop the coffee grinder. If you press
the start button without selecting a time, the unit will start counting down
from 50 seconds)
• Use the arrows up and down to choose the grinding time. By short pressing
the arrows, the time goes up or down by 10 second intervals. By long
pressing the time goes up or down by 2 second intervals.
• If display has been idle for more than 10 minutes, the coffee grinder goes
into sleep mode. Press the start button to activate display.

USE

• Connect the appliance to a wall socket.
• Fill the coffee beans into the bean cup. Either pour them straight into the
cup or place the bean cup on a coffee scale and weigh them for the best
result.
• Choose your preferred grinding level.
• Make sure the coffee ground cup is placed correctly.
• Start the coffee grinder:
– Alt 1: AutoStart by pressing the start button. It will count down from
50 seconds.
– Alt 2: By using the arrows on the display, choose the grinding time
(between 2-50 seconds) and press start.
• The grinding stops when the time is up. To cancel the grinding before the
time is up press the stop button.
INSTRUCTION MANUAL · BALANCE
8