Usage Purpose; Principle Of Operation; Soldering Station - STAMOS S-LS-16 Manual De Instrucciones

CAUTIONS
General safety information for the use of electrical devices:
use of electrical devices:
To avoid injury from fire or electric shock, please ensure compliance with safety instructions when using
this device. Please read the instruction carefully and make sure that you have understood them well. Keep
the manual near the equipment to be able to read it at any time. Always use current sources connected
to the ground and providing the necessary voltage (indicated on the label on the device). If you have any
doubt, let an electrician check that your outlet is properly grounded. Never use a damaged power cable.
Do not open the unit in damp or wet environment, or if your hands or body are damp or wet. Protect
the unit from solar radiation. Use the device in a protected location to avoid damaging the equipment or
endangering others. Make sure the device is able to cool and avoid placing it too close to other devices
that produce heat. Before cleaning, disconnect it. Use a soft damp cloth for cleaning. Avoid using detergent
and make sure that no liquid enters the unit. No internal element of this device needs to be maintained by
the user. An opening of the device without our approval leads to a loss of warranty.
General safety information for the use of the device:
• The user manual should be kept close to the device and should always be accessible for the users.
Instruct your employees how to use the device properly.
• Make sure the hot air can circulate well and place the device more than 10 cm away from walls and
other electrical devices. Properly aerate the working area.
• Do not place the device close to combustible materials.
• When first using the device the heating element may produce a light smoke. This is absolutely normal.
Simply ensure that the smoke can evaporate and that a good aeration is provided.
• Some parts of the device can get extremely hot. To avoid any injuries, be careful whenever you come
into contact with the device.
• Clean the device regularly to avoid permanent accumulation of dirt.
TECHCNICAL DETAILS
Model
Voltage (V)
Rated current (A)
Power (W)
Work temperature (⁰C)
Storage temperature (⁰C)
Temperature range (⁰C)
Output power (W)
Temperature stability
Tip resistance to ground
SMD REWORK STATION
Temperature range (⁰C)
Output power (W)
Temperature stability
Airflow (L/min)
10
EN
6132 S-LS-16 | 6133 S-LS-16 Basic
230 ~50Hz
6
720
0/+40
-20/-80

SOLDERING STATION

200-480
±1 ⁰C
75
<2 Ω
100-480
550
±1(⁰C)
28

USAGE PURPOSE

The device is designed for:
1. Different kinds of soldering, de-soldering of the electronic components such as: SOIC, CHIP, QFP,
PLCC, BGA, SMD, etc.
2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
Any damage resulting from a non-conform use of the device is to be paid by the user!

PRINCIPLE OF OPERATION

12 9
11 10
13
15 16
1. airflow volume adjustment knob
2. SMD rework gun cable
3. soldering iron smoke absorber switch on / off
4. ball airflow volume indicator
5. SMD rework gun switch on / off
6. SMD rework gun temperature unit (Fahrenheit or Celsius)
7. SMD rework gun working indicator
8. SMD rework gun temperature display
9. soldering iron temperature unit (Fahrenheit or Celsius)
10. soldering iron working indicator
11. soldering iron temperature display
12. soldering iron switch on /off
13. soldering iron temperature setting buttons
14. SMD rework gun temperature setting buttons
15. soldering iron connection socket
16. smoke absorber pipe
EN DE
5
6
8 7
14
4
1
2
3
11