Foster KE60 MTL INOX Hoja De Características página 8

Programming the Timer Alarm
1 Press on MODE. The
the clock display.
2 Select the length of time after which you
want the alarm to sound by pressing on
+ or -.
3 The alarm will be confirmed by two conse-
cutive beeps and the display will show the
current time. The
4 At the programmed time, the alarm will
sound and the symbol will begin to flash.
5 Press on any symbol to turn off the alarm.
The symbol will continue to flash.
6 Keep pressing MODE until the function is
switched off.
You can see how much time is left at any time
by pressing MODE until the
hes. You can then change the selected time
by pressing + or -. The beep you hear will con-
firm the new time has been set.
Programming Cooking Time
1 Press MODE until you hear a beep. Press
MODE again and the word "dur" will appear
on the clock display.
2 Select the cooking time by pressing + or -.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off automati-
cally.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
6 Press any symbol to turn off the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on MODE until you hear a
beep to show the function is now off. Then
set the controls to
oven.
You can see how much time is left and chan-
ge the remaining cooking time. Follow the pre-
vious instructions.
To cancel this function, just press + and - at
the same time.
symbol will flash on
symbol will remain lit.
symbol flas-
to switch off the
Programming the Cooking Stop Time
1 Press MODE until you hear a beep. Then
press MODE until the word "End" appears
on the clock display.
2 Select the cooking stop time by pressing
+ or -.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off automati-
cally.
4 Select a cooking function and temperature.
5 When it is the time for cooking to stop, the
oven will switch off and an alarm will sound.
6 Press any symbol to turn of the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on MODE until you hear a
beep to show the function is now off. Then
set the controls to
oven.
You can use this function even if you are coo-
king with the oven. If this is the case, follow
all of the above instructions except No. 4.
You can see the stop cooking time at any time
by following instruction No.1.
Programming Cooking Time and Cooking
Stop Time
11 Press MODE until you hear a beep. If you
press MODE again, the word "dur" will
appear on the clock display.
12 Select the cooking time by pressing + or -.
13 A beep will then sound and the present
time and AUTO will show.
14 Press MODE until you hear a beep. Then
press MODE until the word "End" appears
on the clock display.
15 Select the stop cooking time by pressing
+ or -.
16 A beep will then sound and the present time
and AUTO will show.
17 Select a cooking function and temperature.
18 The oven will remain off with AUTO on the
clock display. The oven is now programmed.
1
to switch off the
9