SRAM ROCK SHOX Reverb Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
English
6
ADJUST THE SADDLE ANGLE
Adjust your saddle to the angle and fore-aft position of your preference, then use a
4 mm hex to tighten each seat clamp bolt, in an alternating fashion, to
8-10 N·m (70-89 in-lb).
4
8-10 N·m
(70-89 in-lb)
7
ALIGN THE SEATPOST TO THE FRAME
If necessary, loosen the seat clamp device on your frame and
align your seatpost so that the saddle is in line with the top
tube of your frame. Re-torque the seat clamp device to the
frame manufacturer's specifications or 5-6 N·m (40-60 in-lb),
whichever is lower.
8
INSTALL THE REMOTE (DISCRETE CLAMP)
Close the remote clamp around the handlebar. Insert the remote clamp bolt and use
a T25 TORX
®
to loosely tighten the bolt to hold the assembly together. Rotate the
remote clamp to the desired position and tighten the clamp bolt to
5-6 N·m (43-52 in-lb).
6
Reverb User Manual
Reverb User Manual
INSTALL THE REMOTE (MATCHMAKER X)
Remote - Install the remote bracket nut in the channel
on the inside surface of the remote clamp. Position
the remote bracket on the outside of the
MatchMaker X (MMX) clamp and install the MMX
bracket bolt. Use a T25 TORX ® to torque the bracket
bolt to 3-4 N·m (35-44 in-lb).
Brake lever - Position the brake lever against the
8-10 N·m
handlebar. Close the remote clamp around the
4
(70-89 in-lb)
handlebar and brake lever. Insert the remote clamp
bolt and loosely tighten the bolt to hold the assembly
together. Rotate the remote clamp to the desired
position and use a T25 TORX to tighten the clamp bolt
to 5-6 N·m (43-52 in-lb).
Shifter - Attach the shifter to the remote bracket with
the shifter mounting bolt. Use a T25 TORX wrench to
torque the shifter mounting bolt to
2.8-3.4 N m (25-30 in-lb). Reposition the shifter if
necessary by loosening the MMX bracket bolt,
adjusting the angle of the shifter, and re-tightening the
bracket bolt to 3-4 N·m (35-44 in-lb).
Copyright © 2010 SRAM, LLC
95-4215-000-000 Rev B
English
25
3-4 N·m
(35-44 in-lb)
25
5-6 N·m
(43-52 in-lb)
2.8 - 3.4 N·m
25
(25-30 in-lb)
7

Publicidad

Tabla de contenido
loading

Tabla de contenido