Camera Setup; Monitor Setup; Power Supply - AVAILAND Follow Baby Manual Del Usuario

Setup
1

Camera Setup

1
.1 P ower Supply - Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the other
end into the back of the camera. See Fig. 3.
Note : Use the adapter labeled OUTPUT: 6V DC with the camera.
2. Press the POWER button
The LED on the camera will light up (green light). See Fig. 3.
Note : Press the POWER button less than 1 second to turn off
the camera.
1
.2 Fine Tuning
Place the camera in a convenient location, point the lens toward the observation
area.
1
.3 Night Vision
The camera has eight high-intensity LEDs for picking up clear images in the
dark. When the light sensor detects low ambient light levels, the LEDs will be
automatically activated.
1
Room Temperature Measurement
.4
Temperature sensor can measure room temperature on camera side and the room
temperature indicator will be displayed on the screen of the monitor unit.
2

Monitor Setup

2

Power Supply

.1
The monitor uses built-in rechargeable battery or the household AC power current.
Using built
1.
Press the POWER/VOX button
the monitor on. See Fig. 4.
Note 1: Charging via power adapter.
Note 2: When power is sufficient, the "Power" LED will light up (green light);
Note 3: Press the POWER/VOX button and keep it around 3 seconds to turn off
2
-
in Battery
When battery is low, the red LED light will start blinking.
the monitor.
less than 1 second to turn on the camera.
and keep it around 3 seconds to turn