Technical Specifications; Ec Declaration Of Conformity - Klein + Hummel CLS FX 2 Serie Manual Del Usuario

■ Technical Specifications

Drivers
Low frequency cutoff
Low frequency perception
System sensitivity
Coverage pattern
Maximum SPL
Input
Input trim Attenuation
Cabinet material
Cabinet finish
Mounting
Compatible mounting accessories
Weight
Height x width x depth
Drivers
Low frequency cutoff
Low frequency perception
System sensitivity
Coverage pattern
Maximum SPL
Input
Input trim Attenuation
Cabinet material
Cabinet finish
Mounting
Compatible mounting accessories
Weight
Height x width x depth

■ EC Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directives 2004/
108/ EG and 2006/ 95/ EG. The declaration is available on the internet site at www.klein-hummel.com. Before
putting the device into operation, please observe any respective country-specific regulations.
Installation and Operating Manual CLS FX Series
CLS-2FX100-B
6 x 2" drivers per channel (stereo)
12 x 2" drivers (mono)
370 Hz, actual (stereo)
350 Hz, actual (mono)
180 Hz perceived with virtual bass
95 dB SPL, 1 Watt, 1 meter (stereo)
97 dB SPL, 1 Watt, 1 meter (mono)
70° horizontal x 160° vertical,
nominal (stereo)
50° horizontal x 160° vertical,
nominal (mono)
105 dB SPL
Line level, -10 dBV minimum, nominal
2 x RCA connectors on 5' cable tail to terminal block behind end cap
Black powder coat, (RAL 9005), flat
2x included L-brackets, rear nut channel
KG-30, Flat panel adaptors by 3rd parties
4 kg / 8.82 lbs
70 x 1030 x 65 mm
2.75" x 40.55" x 2.55"
CLS-2FX125-B
9 x 2" drivers per channel (stereo)
18 x 2" drivers (mono)
370 Hz, actual (stereo)
350 Hz, actual (mono)
180 Hz perceived with virtual bass
95 dB SPL, 1 Watt, 1 meter (stereo)
97 dB SPL, 1 Watt, 1 meter (mono)
70° horizontal x 160° vertical,
nominal (stereo)
50° horizontal x 160° vertical,
nominal (mono)
106 dB SPL
Line level, -10 dBV minimum, nominal
2 x RCA connectors on 5' cable tail to terminal block behind end cap
Black powder coat, (RAL 9005), flat
2x included L-brackets, rear nut channel
KG-30, Flat panel adaptors by 3rd parties
5 kg / 11 lbs
70 x 1250 x 65 mm
2.75" x 49.25" x 2.55"
CLS-3FX100-B
4 x 3" drivers per channel (stereo)
8 x 3" drivers (mono)
200 Hz, actual (stereo)
160 Hz, actual (mono)
80 Hz perceived with virtual bass
96 dB SPL, 1 Watt, 1 meter (stereo)
98 dB SPL, 1 Watt, 1 meter (mono)
65° horizontal x 160° vertical,
nominal (stereo)
55° horizontal x 160° vertical,
nominal (mono)
108 dB SPL
Stereo/Mono switch
Knob behind end cap
Extruded aluminum
6 kg / 13.23 lbs
80 x 1030 x 65 mm
3.15" x 40.55" x 2.55"
CLS-3FX125-B
4 x 3" drivers per channel (stereo)
8 x 3" drivers (mono)
200 Hz, actual (stereo)
160 Hz, actual (mono)
80 Hz perceived with virtual bass
96 dB SPL, 1 Watt, 1 meter (stereo)
98 dB SPL, 1 Watt, 1 meter (mono)
65° horizontal x 160° vertical,
nominal (stereo)
55° horizontal x 160° vertical,
nominal (mono)
109 dB SPL
Stereo/Mono switch
Knob behind end cap
Extruded aluminum
6,4 kg / 14 lbs
80 x 1250 x 65 mm
3.15" x 49.25" x 2.55"
English
Klein + Hummel
5