Browning BR4GRILL Manual Del Usuario Y Lista De Piezas página 14

Assembly Instructions
d. Place the side burner hose through the hole in the right side panel (P). See Fig. 12.
Fig. 12
e. Wind shield (I) is required to be screwed in place as shown. Refer to Fig. 13, Fig. 14 and Fig. 15
to install the wind shield correctly.
This Side Up
Wind Shield
Fig. 14
Step 10: Install Side Shelf
Required: (1) Side Shelf (AB), (2) 1/4-20 x 1 3/8" Screws (H)
a. Loosen two screws attached in the left panel of the burner box and one attached on the left panel
of the control box 3-4 turns (See Fig.16). Parts are not to be installed in this step. Just loosen the
three screws.
All manuals and user guides at all-guides.com
Screw Here
Fig. 16
Page 11
Fig. 13
Wind Shield Upper Edge Position
Fig. 15