Toyota PT546-52121 Manual Del Propietário página 40

Setting Automatic Connection of a
Bluetooth Device
You can select whether or not
a Bluetooth device is automati-
cally connected when the ignition
switch is set to ON.
1 Turn the MULTI KNOB to
select BT POWER ON (con-
nect automatically) or BT
POWER OFF (do not connect
automatically), and press the
MULTI KNOB.
Checking Device Information
You can check the device name of
this unit and the Bluetooth device
address.
1 Turn the MULTI KNOB to
select BT INFO, and press the
MULTI KNOB.
2 Turn the MULTI KNOB to
select DEVICE NAME or
DEVICE ADDR (Bluetooth
Device Address), and press the
MULTI KNOB.
You can check the selected
information item.
40
Setting Connection Confirmation
You can select whether or not to
display the connection confirma-
tion when the ignition switch is
set to ON and a Bluetooth device
is connected.
1 Turn the MULTI KNOB to
select DISPLAY ON (display) or
DISPLAY OFF (hide), and press
the MULTI KNOB.
Initializing Information
You can initialize the hands-free
phone settings (ring tone and
volume), the settings information
for this unit (Bluetooth Power,
Bluetooth connection completion
display and passkey) or all the set-
tings information.
1 Turn the MULTI KNOB to
select INITIALIZE, and press
the MULTI KNOB.
2 Turn the MULTI KNOB to
select SET HF SOUND (to
initialize the tone settings for
the hands-free phone), DEVICE
INFO (to initialize the settings
information for this unit) or ALL
INITILZE (to initialize all the
settings), and press the MULTI
KNOB.
3 Turn the MULTI KNOB to
select YES (initialize) or NO
(do not initialize), and press the
MULTI KNOB.