Powerbuilt 648443 Guia De Inicio Rapido página 2

Universal Pulley Puller Kit
Overview: This Kit consists of 9 Major Components
1. Adjustable puller body – Center point adjustment maintains symmetry when adjusting.
2. Center screw for deep serpentine pulleys.
3. Center screw for shallow serpentine pulleys.
4. Pointed end pin adapter – for use on end of center screw to press on shafts with a round
center depression.
5. Flat end pin adapter – for use on end of center screw to press on flat shafts.
6. Long Slide on clamp Arms – for use on deeper/hallow pulleys or with wider groves.
7. Short slide on clamps Arms – for use on shallow Pulleys with narrower groves.
1
6
6
1
7 7
2 3
4 5