Renin Modena 200097 Manual De Instrucciones página 4

ENGLISH
MAPPING OUT THE MIRROR BACK
1
PLATE INSTALLATION AREA CONT'D
C. Using a 1/4" drill bit. Drill holes in the corresponding marks
from Step A (Fig.3). Place supplied anchors in the holes (Fig.4).
Secure back plate with screws supplied to anchors (Fig.5).
Fig.3
Drill holes
Fig.5
Secure back plate to anchors
4 | ENGLISH | HARDWIRED LED ILLUMINATED MIRROR | INSTRUCTION MANUAL
PART# 98-3200 REV.B
Fig.4
Add anchors*
*Note: If back plate is secured to studs,
anchors are not required