Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
interior
23/6/05
17:08
•
Before connecting the appliance, ensure
that blending attachment is correctly
inserted and wait until the motor has fully
stopped before removing it.
•
Do use or place any part of this
appliance on or near hot surfaces (gas
or electric hobs or ovens).
4. STARTING UP
Attaching and detaching the blending
attachment
All attaching and detaching operations should
be done when the appliance is unplugged.
To detach the blending attachment from the
motor unit, unscrew it in an anticlockwise
direction, as shown in fig. 2. To attach it,
screw it in the opposite direction.
5. OPERATION
Before using for the first time, clean the
blending attachment and the jug in warm,
soapy water and dry the attachment well before
reassembling. See section entitled "Cleaning".
Never submerge the motor unit in water or
hold under a running tap.
•
Assemble the blender as described in the
previous section.
•
To avoid spillage or splashing, before
switching the appliance on, insert the
blending attachment into the ingredients in
an upright position.
•
Plug the appliance into the mains.
•
Press the button gently at first until the
blade start rotating. This is the slowest
speed and is recommended for making
mayonnaise, blending liquids or fluid
masses slowly and carefully and mixing
beaten egg whites or flour into a dough or
other mixture.
•
To select the high speed option, press the
button down as far as it will go. This speed
is recommended for beating egg whites,
cake mixtures and sauces etc., as well as
for mashing potatoes and making soup,
mincemeat and special dough for baking.
•
You should not allow the appliance to
function continuously for any longer than 20
seconds for models B-340P and 345M, or 3
Página 7
seconds for models B-440P and B-445M. If
you wish to continue using the appliance
after this time has elapsed, wait a few
minutes to allow the motor to cool
•
Do not hold the blender still while in
operation. Move in a circular motion around
the bottom of the pan or bowl, starting in the
middle and then moving out to the sides.
•
Switch off the motor before removing the
blender from the ingredients.
Always unplug the appliance before cleaning.
Detach the blending attachment from the motor
unit, and clean it under the faucet or submerge it
in soapy water. Do not wash the blending
attachment and the cup in the dishwasher.
Do no use abrasive substances or solvents for
cleaning.
Make sure the blending attachment is dry before
putting the appliance back together.
The motor unit may be cleaned with a dry or
slightly damp cloth.
NEVER SUBMERGE THE MOTOR UNIT IN
WATER OR PLACE IT UNDER A RUNNING
FAUCET.
7. IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH
EC DIRECTIVE2002/96/EC.
dealer providing this service.
Disposing of a household appliance separately
avoids possible negative consequences for the
environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to obtain
significant savings in energy and resources.As a
reminder of the need to dispose of household
appliances separately, the product is marked
with a crossed-out wheeled dustbin.
8
6. CLEANING
At the end of its working life, the
product must not be disposed of
as urban waste.
It must be taken to a special
local authority differentiated
waste collection centre or to a
Publicidad
Tabla de contenido
