Getting Started; Charging Your Headset - Alcatel Onetouch BH60 Manual Del Usuario

l manuals and user guides at all-guides.co

Getting started

To use the BH60 Bluetooth headset, follow these steps:

1. Charging your headset

Ensure your headset is fully charged and powered on before
using it. The headset comes with a built-in rechargeable
battery. It is recommended to fully charge prior to using the
headset for the first time. Open the USB Cap and insert the
USB Pins into a PC, laptop computer, charger or other USB
port.
2. Pairing
Once charged, you can pair your headset with a Bluetooth
enabled mobile phone.
1) Ensure that the headset is off.
2) To activate the pairing mode, press and hold the
headset's Power Key without releasing your finger until
its status indicator flashes red/blue.
3) Make sure that your mobile device's Bluetooth is
activated. Search Bluetooth devices and select "ALCATEL
onetouch BH60" to connect. After pairing, the LED
changes to blue and lights up every six seconds.
4) After pairing the headset with the first phone, turn off
the Bluetooth. The headset LED flashes blue. Pair the
second phone with the headset. After connecting, turn on
the Bluetooth of the first phone and choose 'ALCATEL
onetouch BH60' to pair again. The headset should be
paired with two phones now.