Steren CCTV-906 Manual Del Usuario página 12

e) Motion Setup.
This option allows you to set the motion detection of each camera
the options are as follows:
Detection time:
It is time to be active in the detection of movement.
The options are: always on, always off and ON / OFF
To select the mode press the right or left.
In the on / off switch allows turns on the time and the time that will shut
down detection.
To set down and press the button to change the digit press left or right.
To change from hour to minutes press the button below.
Sensitivity allows you to change the values of the sensitivity with which
detects movements and values are Min, from -6 to +6 and Max.
Speed: The values are Min, from -6 to +6 and Max.
Masking area: Allows you to set a defined area of detection.
To exit the menu press the Menu button.
ENGLISH-12