Orbegozo EV 3500 Manual De Instrucciones página 19

EV 3500
1. Open lid. Place one end of cut bag onto sealing strip, don't worry if you accidently place any material
onto the gasket area.
2. Close lid by pressing down on both sides until two ''click'' sound heard.
NOTE: The sealing strip will NOT work properly unless you lock the lid. Make sure that the lid has been
locked on both sides for proper sealing.
3. Now that lid has been locked, press the ''SEAL ONLY'' button to create a custom sized bag. The
indicator light illuminates during the seal process.
4. Once completed the indicator light of seal button will turn off; press the release buttons on both sides
of the machine, it is now safe to take out the newly created bag.
5. The custom sized bag is now ready for vacuum sealing.
CAUTION : Under heavy usage, appliance will shut off automatically to prevent overheating. please wait 5
minutes to allow appliance to cool down.
How to Vacuum and Seal the Vacuum Bags
1. Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2 inches between the
contents and the top of the bag to allow for bag contraction.
2. Open lid and place the open end of the bag down into the vacuum chamber.
19