Tripp-Lite NPOEI-60W-1G Guia De Inicio Rapido página 4

Mounting and Dismounting
Instructions
Notes:
• These open-type devices shall be DIN-rail mounted or wall mounted
(optional) in a cabinet or enclosure where the ambient temperature
shall not exceed 75°C.
• Caution: Hot surface! Do not touch. Please wear protective equipment
before coming into contact.
• A corrosion-free mounting rail is advisable. When installing, allow
enough space between devices to properly install cabling and provide
room for proper airflow.
To mount, place the PoE injector on the DIN rail using the slot.
Push the front of the unit toward the mounting surface until it
snaps into place with a "click" sound.
To dismount, press the unit from the top, and pull out the lower
edge of it. Remove the unit from the DIN rail.
-04-051 933E83-Book.indb 4 -04-051 933E83-Book.indb 4
Mounting the Injector
4
Removing the Injector
10/14/2021 10:33:57 A 10/14/2021 10:33:57 A