dormakaba BEST Switch Bridge Instrucciones De Instalación página 4

B r i d g e I n sta l l at i o n I n st r u ct i o n s
5
PLUG IN POWER SUPPLY
B
Plug the power supply (B) into an AC outlet.
6
CONNECT TO NETWORK(S)
NOTE: Either Ethernet (D) may be connected to either Ethernet port (Eth 1 or Eth 2).
Connect an Ethernet cable (D) with Internet connectivity to either Ethernet port (Eth 1 or Eth 2).
Optionally, if your ACS resides on an isolated network, connect an Ethernet cable (D) with
connectivity to the isolated network into the remaining Ethernet port (Eth 1 or Eth 2).
BEST is a trademark of dormakaba USA Inc.
NOTE: LEDs on each
Ethernet port will light
when the Ethernet cables
(D) are plugged into the
bridge (A).
Back Side of Bridge (A)
NOTE: The power button on the
bridge (A) will light up green.
Front Side of Bridge (A)
D
4/24
D
T91406_A ©2020 All rights reserved.