Publicidad
Idiomas disponibles
Idiomas disponibles
Westward Operating Instructions and Parts Manual
4.
Turn draw stud clockwise with the wrench until material is punched.
5.
Disassemble punch by turning draw stud counterclockwise while holding punch. Tip die and drop out split slugs.
6.
For 3/4" through 2" conduit sized holes use 3/4" draw std. place selected size die on draw stud. Insert draw stud
in 3/4" or larger pilot hole. Thread same size punch on the draw stud with the cutting edge toward the material
being punched.
KNOCKOUT HOLE
KNOCKOUT
KNOCKOUT
KNOCKOUT
HOLE
HOLE PUNCH
HOLE
SEUDS
SEUDS
SEUDS
SEUDS
CAUTION: Punch will become free hole and could fall.
3
PUNCH
PUNCH SET,
PUNCH
SET, W6
SET,
SET,
W6
W6
W6 PUNCH,
PUNCH,
PUNCH, 2 2 2 2
PUNCH,
13G258
Publicidad
