Publicidad
Idiomas disponibles
Idiomas disponibles
Westward Operating Instructions and Parts Manual
7.
Turn draw stud clockwise with wrench until material is punched.
CAUTION: Punch will become free of hole and could fall.
8.
Disassemble punch by turning draw stud counter-clockwise while holding punch. Tip die and drop out split slugs.
Time saver: use 1/2" conduit punch to make 7/8" pilot hole for 3/4"-2" conduit punches.
When hole is completed the punch unit (punch, die and draw stud) can fall free toward the die side.
Always wear safety goggles during the operation.
Do not punch enclosures containing or close to live circuits. Electrical shock could result causing
severe or death.
KNOCKOUT HOLE
KNOCKOUT
KNOCKOUT
KNOCKOUT
HOLE
HOLE PUNCH
HOLE
SEUDS
SEUDS
SEUDS
SEUDS
4
PUNCH
PUNCH SET,
PUNCH
SET, W6
SET,
SET,
W6
W6
W6 PUNCH,
PUNCH,
PUNCH, 2 2 2 2
PUNCH,
13G258
Publicidad
