Troubleshooting Guide - Telstar TLS022110KS Manual De Instrucciones

2. Unmounted
- Open the back cover of the filter as shown in the picture.
- Clean filter thoroughly with water.
3. Cleaning the filter duct
-Clean filter thoroughly with water.
4. Installing the filter
- IInstall the filter
- Insert the inner cover of the valve cover.
- Place the lock on the top cover
- Press the cover into the slot, as shown in the picture.
Lint filter cleaning
The lint filter should be positioned every time the
washer is used.
The lint filter should be cleaned after using your
washer.
1. Removing the lint filter
Hold the filter as shown in the picture, gently push
down and remove the filter from the filter frame.
2. Cleaning the filter
Wash the filter while it is moist. Wash only with water. After washing, dry the filter. Avoid direct sunlight.
3. Installing the filter.
Insert the bottom of the filter into the groove, then push the filter into place.

Troubleshooting Guide

Problem
Don't wash
Check
Is the washing clock set to "0"?
Are the covers open?
Feeding problems?
Fuse blown?
12
WASHING MACHINE
TLS022110KS