Fitness Bike Installation Location - Sportana Eagle IV Manual Del Usuario

10. Fold the Twist Trainer (10) as shown in the picture and fasten the bolt (26) to the lower stand
(3).
11. Finally, check the screws to make sure they are tight.
Insert and replace batteries
(2 x AAA batteries not included)
1. Remove the old batteries if necessary.
2. Insert the new batteries into the battery compartment. Make sure that the polarity is correct.
3. Close the battery compartment.

FITNESS BIKE INSTALLATION LOCATION

When using your fitness bike, you must
maintain a minimum radius clearance of 0.6
meters around your workout area. This is
important so that you do not feel confined
during your workout and can get on and off
without obstruction. If two pieces of equipment
are placed next to each other, a clearance of at
least 0.6 meters must be maintained around
both training areas.
31 www.DEUBAXXL.de