Technical Characteristics; Size And Weight - Ugin DUCATRON 3 Serie Modo De Empleo

INTRODUCTION
We would like to congratulate you on becoming the new owner of a "Ducatron serie 3".
This machine has been carefully designed, manufactured and tested to give you complete
satisfaction.
You will be making perfect castings and risk free, whatever alloy you use (except titanium).
To make the best use of your Ducatron, please read the operating instructions and advice
contained in this manual attentively.

TECHNICAL CHARACTERISTICS

Power supply :
Frequency :
Power consumption :
Generator operating frequency :
Maximum temperature :
Arm rotation speed:
Crucible capacity :
Built – in variable power control
Argon gas: protects the alloy from oxidation.
cooling :
c) Electronic generator :
One 120 x 120 screw fan, output 25 L/s.
d) Inductor :
Close –circuit water pump with 18 litres tank.
ACCESSORIES
2 Grey "silicon carbide" crucibles
3 White "silicon dioxide" crucibles 1 Set of casting rings
1 Vitrified carbon sheath
1 Quartz rod
1 Plug
1 Argon joint
60 g precious or non precious alloy

SIZE AND WEIGHT

Width
Depth
Height w/cover down
Height w/cover up
Net weight
230 V single -phase
50/60 Hz
2500 W
135 kHz
1500 / 1600 ° C
500 rpm
690 mm
585 mm
950 mm
982 mm
110 kg
6 Cradles (6 sizes)
1 Conveyor fork
1 Set of fuses
1 Set of adjustable feet
9
SERIE3