Troubleshooting - SoWash Vortice SWIE10002 Manual De Uso

• After using special solutions in the water container, clean by slightly filling with warm wa-
ter and rinse thoroughly, direct the tip towards the washbasin, switch on the appliance
and let it run through until empty. This helps to prevent blockages to the tips and helps to
prolong the life of the appliance;
• Do not immerse in water to clean.
MAINTENANCE
• Whichever method of cleaning or maintenance you must always have the product discon-
nected from the rechargeable base. Always follow the instructions stated in this manual;
• The Sowash Electric Irrigator does not have repairable parts by the consumer;
• Do not try to disassemble the appliance;
• Do not try to resolve problems by yourself, contact Water Powered srl
• When the appliance is completely dry, store in a cool dry place;
• Periodically it is necessary to replace the tips. It is recommended to replace ever 3/6
months depending on the model or whenever they are used or damaged.

TROUBLESHOOTING

Problem
If there is a leak from the tip
EN
and the handle
The bristles on the tip are
consumed
There is a leak from the tube
of the appliance
There is a leak from the wa-
ter container and the base
The water jet pressure is
modest
The appliance does not swi-
tch on
Certain situations that may occur from time to time are completely unpredictable and therefore
it is not possible to describe appropriate intervention procedures.
If necessary, contact Water Powered srl to receive the appropriate troubleshooting instructions.
Cause
The tip is not inserted cor-
rectly
The tip is old
The tube is damaged
Missing valve
The water container has not
been inserted correctly
The water container has not
been fitted correctly
The motor is not working
6
Solution
Remove and insert the tip
again
Replace with new tips
Can be replaced by contact-
ing the manufacturer
Replace the water container
Remove and reinsert the
water container
Remove and reinsert the
water container
Make sure that it is plugged
in correctly