Methods Of Use - HTW -CLE-11NOXUAGLP-K Manual De Usuario E Instalacion

● A reliably grounded receptacle must be installed to the left or right of the unit.

4. METHODS OF USE

4.1 Preparation before ignition
Insert the power supply plug and turn it on.
●
● Open the main switch on the gas valve.
● Open the water inlet valve before ignition.
① Insert the plug
③ Fully open the water inlet valve
Hot water outlet with control panel or line controller. The line controller is optional for clients.
Without a special request from customers, the unit will be equipped with no line controls.
Fully open the gas inlet
②
valve
Be sure to open it fully
before use
NOTE
17