Parts Overview; Supported Formats - Bresser 9630200 Instrucciones De Uso

1.3 Parts overview

1. Wall mount
2. Infrared lights
3. Lens
4. LCD screen
5. Motion sensor
6. Closing cap
7. Hanger for fastening strap
8. Battery compartment door
9. DOWN (Preview button)
10. OK button
11. UP (Preview button)
12. MENU button
13. microSD memory card slot
14. Mini USB Port
15. On/Off switch
16. Battery tray
1.4 Camera I/O Interfaces
The camera has the following I/O interfaces: Mini USB con-
nector, SD-card slot
All manuals and user guides at all-guides.com

1.5 Supported formats

Here are some important notices. You don't need to wor-
ry about the file system format of the camera unless you
have problems with reading the SD-card with your other
equipment. If this happens, please format the SD-card in
the camera or in a computer first and then reinsert the card
into your camera to make a try.
Item
Image
File format
2 Important Information
• The working voltage of the camera is 6V. The camera is
supplied by eight AA batteries. The camera is also able to
work with just 4 AA batteries.
• Please install batteries according to shown polarity.
• For camera operation an microSD or TF-card (8 MB to 32
GB) is needed.
• Please unlock the write-protection before inserting the
SD-card.
• Please insert the SD-card when the power switch is at
Format
JPG
FAT32
EN
17