Wiseup T182 Manual Del Usuario página 3

All manuals and user guides at all-guides.com
3.2.2. Press the Video Recording Button or Button B once to record video. The indicator
light will flash red twice then turn off.
3.2.3. Press the Video Recording Button or Button B once again to stop recording video.
The indicator light will glow solid red, indicating the camera is back to standby mode.
[Note]:
1). A video file will be generated and saved every 10 minutes automatically.
2). The camera can record video for 5.5 hours continuously on a full charge.
3). Video Resolution: 1920×1080P Video Format: MOV
4). The camera supports loop recording.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. S Slide the Power Switch to the ON position (opposite to the USB port). Power on
the camera by pressing the Power Button or Button A for 2 seconds. The indicator light
will flash red and blue once, turn off, then glow solid red, indicating the camera has
entered into standby mode automatically.
3.3.2. Press the Camera Button or Button C once to take a photo. The indicator light will
flash red and blue once, then turn off and glow solid red, indicating the camera is back to
standby mode.
3.4. MOTION DETECTION RECORDING
3.4.1. Slide the Power Switch to the ON position (opposite to the USB port). Power on the
camera by pressing the Power Button or Button A for 2 seconds. The indicator light will
flash red and blue once, turn off, then glow solid red, indicating the camera has entered
into standby mode automatically.
3.4.2. Press the Button D once to enter into motion detection recording mode. The
indicator light will flash blue 3 times and then turn off.
3.4.3. The camera will record video automatically when a movement is detected.
3.4.4. Press the Button D once again to exit motion detection recording mode. The
indicator light will glow solid red, indicating the camera is back to standby mode.
IV. Video/Image Files Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.