Faucet Installation - Concept BDG3334BE Manual Del Usuario

EN
Polish faucets with chrome finish from time to time with a special agent for stainless
steel or chrome finish. That will remove stains and restore the chrome surface gloss.
Treat faucets with granite surface once in a while with water and milk for granite sinks.
Rinse the surface with warm water and dry with a soft cloth. Remove lime deposits
around the strainer with vinegar solution or acetic cleaner.
Daily and regular care extends their lifespan.

FAUCET INSTALLATION

Please follow the following instruction during product installation: The warranty does
not cover damages caused by incorrect installation.
Before product installation, make sure it is not damaged in any way.
The product should be installed by a professional qualified to install faucets.
Thanks to the fact that each faucet body can be rotated 360 °, you can install the handle
on both the right and left side.
Installation
• Shut off the hot and cold water supply.
• Unscrew the aerator to prevent it from clogging the first time you use the faucet.
• Position the faucet body on the sink with the fixing parts. Connect the water hoses
and tighten by hand. Do not tighten with tools or brute force, the threads on valves
or hoses could be damaged.
• If necessary, screw a 3/8" threaded adapter onto both hoses.
• Screw the hoses to the water supply and open the water supply. Leave the faucet in a
closed position where no water flows and check all connections for leaks. If you need
to make additional tightening of joints, be sure to close the water supply.
• If all joints are tight, let hot and cold water run, first for a shorter period of time. Then
install the aerator that you first dismantled and put the faucet back into operation.
22