Sink Installation - Concept DG10C45BE Manual Del Usuario

EN

SINK INSTALLATION

Please follow the following instruction during product installation:
The warranty does not cover damages caused by incorrect installa-
tion.
These instructions are for installation of sinks that are placed on the
kitchen counter top only.
Before product installation, make sure it is not damaged in any way.
The product should be installed by a qualified professional.
1.
Select a location suitable for the
sink. The worktop surface must be
horizontal and have sufficient space
under it. Place the template, which
is always included in the package,
and fix it with adhesive tape. Then
trace the template with a pencil.
2.
In each corner, drill a hole of 10 mm.
3.
Using a reciprocating saw,
cut the sink hole.
22