Cleaning And Care - Brandani 57286 Manual De Instrucciones

Decalcifying
Should the appliance switch off before reaching boiling point. This is a sign that decalcifying is necessary
Any regular descaling agent may be used, provided the relevant instructions are observed. Do not
fi ll the kettle to the upper mark to avoid spillage if the descaling agent causes the water to foam.
To clean the kettle thoroughly of any decalcifi cation residues, let it go through several boiling cycles,
using clean water with each cycle. Rinse the kettle with clean water afterwards

CLEANING AND CARE

- Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled
down completely.
- Do not use abrasives or harsh cleaning solutions.
- Do not immerse the base or the kettle in any liquid, To clean the exterior, a slightly damp, lint-free
cloth may be used
- It is advisable to remove lime deposits form the kettle at regular intervals.
SPECIFICATIONS
Supply voltage: 230V~50Hz
Power consumption:2000W
Capacity:1.8L
57286.indd 15 57286.indd 15
15
6-08-2008 14:10:56 6-08-2008 14:10:56