On Screen Language; Quick Start; Auto Power Off; Front Display/Led - Sharp SD-WH1000U Manual De Manejo

System Setting
Go to "HOME" > "Settings" > "System Settings"

On Screen Language

You can set the language you want to display on the
screen.
Item
English, Español, Français

Quick Start

You can reduce the player's start-up time after turning
on the power.
Item
On: The player quickly starts up from standby.
Off: Power consumption is small during standby.

Auto Power Off

This sets the Player so that power is automatically
shut off if playback is stopped and you do not perform
any operations for about 180, 60 or 10 minutes.
Item
On (180 min), On (60 min), On (10 min), Off

Front Display/LED

If you feel that the front panel display and indicators
on the player are too bright when watching movies,
you can dim them or turn them off except for the
POWER indicator.
Item
Control: Dimmer1 Dimmer2, Dimmer3, Off
Dimmer1: Brightness control during 100% to 10%
Dimmer2: Brightness control during 100% to 10%
Dimmer3: Brightness control during 100% to 10%

AQUOS LINK

This lets you set the Player to receive the control
signal from the AQUOS LINK remote control via the
HDMI cable.
Item
LINK : On, Off
POWERLINK:
Yes: POWER On/Off link together
No: POWER On/Off not link together
NOTE
• This function is available using HDMI 1 OUT terminal
only.
• For details, refer to the operation manual of TV.

Control Panel

This lets you set display of the control panel on the
TV screen to on or off.
Item
On, Off

Auto Update Setting

This lets you to set whether the player should
automatically check for new firmware versions on the
network and notifies you about new firmware.
Item
On: Checks for firmware updates automatically and
notifies you about new firmware.
Off: Does not check for new firmware version automatically.

Remote Control Code

This player can respond to one of three sets of
remote control codes. If you have other SHARP
products in the vicinity of this player, the other
products may respond to this player remote control.
To prevent this, you can select a different remote code.
Item
RC-1 (default), RC-2, RC-3
NOTE
• If you have selected a new remote code, you must set the
remote control handset to use the same code (see page 26).

DivX(R) Registration

The DivX registration code is displayed.
Item
OK
NOTE
• To learn more, visit www.divx.com/vod.

DivX(R) Deregistration

You can deactivate your DivX information on the
player.
Item
Yes, No
NOTE
• To learn more, visit www.divx.com/vod.

System Reset

You can reset all settings to the factory presets.
Item
Reset, Not Reset
52