ERMILA XXL Instrucciones De Uso página 9

Description of parts
A Front grill
B Air inlet aperture with removable cover
C Cold shot button
D Switch for temperature settings
E Fan settings
F On/off switch
G Hanging loop
H Mains cable
I Nozzle
J Universal diffuser (optional accessory, 4300-7900)
K Styling diffuser (optional accessory, 0201-7330)
Operation
· Connect to the mains power supply.
· The hairdryers have two heat settings and two
fan settings. Separate switches allow four or six
temperature/fan settings. The cold-shot switch
can be used to fix the hairstyle:
On/off switch (F):
· Switch on the appliance at the on/off switch (F)
and set the desired fan setting.
Fan-setting switch (E):
Fan setting 1, for a gentle airflow
●
Fan setting 2, for a strong airflow
● ●
· Select the required temperature setting.
Switch for temperature settings (D):
Temperature setting 1, for hot air
●
Temperature setting 2, for hotter air
● ●
Cold-shot button (C):
By pressing the button and keeping it depressed,
the hairdryer can be briefly switched to cold air.
To return to the set temperature, simply release
the button.
· Using the on/off switch (F), switch off the appli-
ance after use.
Styling with the nozzle
The nozzle can be used to direct the airflow onto
the styling brush.
· Position the nozzle and press it towards the
housing (Fig. 1ⓐ).
· To remove the nozzle, simply pull it off in the
direction of the arrow (Fig. 1ⓑ).
Cleaning and care
· Disconnect from the mains before cleaning the
appliance.
· Do not immerse the appliance in water!
· Only wipe the appliance with a soft cloth, which
may be dampened slightly.
Do not use solvents or abrasives!
· To maintain the performance of your hairdryer,
regularly clean the air inlet with a soft dry brush.
To do so, proceed as follows:
· Twist the cover in an anti-clockwise direction
(Fig. 2ⓐ) and remove.
· Clean the cover and air inlet with a soft brush
(Fig. 3).
· Replace the cover and turn in a clockwise
direction until it clicks into position (Fig. 2ⓑ).
Disposal in EU countries
Do not dispose of the appliance with domes-
tic refuse. As part of the EU Directive
governing the disposal of electrical and elec-
tronic equipment, the appliance is accepted
free of charge by local waste collection
points or recycling centres.
Correct disposal will ensure environmental
protection and prevent any potentially harm-
ful impacts on people and the environment.
Disposal in non-EU countries
At the end of its service life, please dispose
of the appliance in accordance with statutory
requirements.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9