Descargar Imprimir esta página

Cleaning The Impeller; Off-Season Storage - Dolphin WAVE 100 Instrucciones De Manejo

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33

Cleaning the impeller

Unplug the power supply.
If you notice debris
trapped in the
impeller, open
the impeller and
remove the debris.
Cable
To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun.

5.5. Off-season storage

If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
• Make sure that no water is left in the pool cleaner
• Thoroughly clean the filter bag and insert in place
• Roll up the cable so that it has no kinks and place
on the Caddy
• Store the pool cleaner upright on the Caddy in
a protected area out of direct sun/rain/frost at a
temperature of between 5˚-45˚C / 41˚-113˚F
Dolphin WAVE 100 Pool Cleaner | Operating Instructions
8151637_Book.indb 7
7
29/12/2013 10:00 AM

Publicidad

loading

Productos relacionados para Dolphin WAVE 100