Placing The Speaker - Denon Envaya DSB-200 Guia De Inicio Rapido

ENGLISH DEUTSCH FRANÇAIS
1. Unpacking the Speaker
Carefully unpack your new Envaya speaker and verify that you
have the following items.

2. Placing the Speaker

Place the speaker on a fl at surface facing towards you
supporting it with one hand.
Place the fi ngers of your other hand across the back top of the
speaker and gently "squeeze" to extend the built-in stand from
the back of the speaker.
1
1.DSB-200EM_QSG_ENG_00A_final_140221.indd
All manuals and user guides at all-guides.com
ITALIANO ESPAÑOL NEDERLANDS
1
РУССКИЙ
SVENSKA
3. Powering the Speaker
Insert the appropriate adapter into the power supply.
q
Connect the power cord to the speaker a wall outlet.
w
Note: The speaker will automatically turn on the fi rst time you
connect the power cord and automatically enter Bluetooth
Pairing Mode, indicated by a two note beep. The Bluetooth
button on the speaker will begin to fl ash as it waits for a
wireless connection from your mobile device.
IMPORTANT
Looking at the white battery status indicator on the top of
the speaker (next to the power button), make sure your
speaker is fully charged before using it for the fi rst time
under battery power.
Charging status (Approximate)
0 – 30% 30 – 70% 70 – 100%
日本語
POLSKI
中文简体字
Fully charged
2014/02/24 11:10:37
中文简体