Pairing Or Unpairing The Pod; Pairing The Pod Through Bluetooth; Pairing The Pod Through Nfc - Motorola Solutions WP300 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
MN007883A01-AA
Chapter 2: Getting Started
2 To unlock and detach the earpiece, turn the connector to align the unlock symbol with the recess
on the front housing and pull the connector out.
NOTE:
Attach or detach your earpiece prior to establishing the connection with the radio or
adapter.
If the wireless is disconnected upon accidental, intentional removal, or attachment of the
earpiece from or to the device, red LED blinks rapidly.
2.3

Pairing or Unpairing the POD

Prerequisites:Turn off your POD.

Pairing the POD through Bluetooth

To function in audio mode, ensure the earpiece portion of the Wireless Device is plugged into the POD
portion. To function as a Standalone PTT Device, remove the earpiece.
Procedure:
1 Press and hold the Power button until the blue LED blinks.
2 From the compatible device, search and select POD from the Bluetooth list.
The device is connected.
NOTE: Always unpair the WP300 from the Bluetooth host and clear the pairing before starting a
pairing process.

Pairing the POD through NFC

To function in audio mode, ensure the earpiece portion of the Wireless Device is plugged into the POD
portion. To function as a Standalone PTT Device, remove the earpiece.
Procedure:
1 Press and hold the Power button until the blue LED blinks.
2 Align the NFC locations on both the POD and the compatible devices.
3 Check the compatible device for indication of successful pairing.
When pairing a standalone PTT device with certain host devices, the following prompt message
appears: Could not connect to WP300.
You must check if the PTT button and Emergency button are working properly. If the buttons
are working, you can ignore this prompt message. If the buttons are not working, you need to
manually pair the POD to the device through Bluetooth.
NOTE: Always unpair the WP300 from the Bluetooth host and clear the pairing before
starting a pairing process.
Example:
8

Publicidad

Tabla de contenido
loading

Productos relacionados para Motorola Solutions WP300

Este manual también es adecuado para:

Pmln8298

Tabla de contenido