Unpairing The Pod; Switching The Operation Mode; Entering Or Exiting Dark Mode - Motorola Solutions WP300 Manual Del Usuario

Figure 1: Prompt Message

Unpairing the POD

Procedure:
1 Press and hold the Power and PTT buttons simultaneously.
The POD indicates that the paired device is "Cleared".
2 Remove the POD from the paired device list on the previous paired compatible device.
2.4

Switching the Operation Mode

To function in audio mode, ensure the earpiece portion of the Wireless Device is plugged into the POD
portion. To function as a Standalone PTT Device, remove the earpiece.
Prerequisites:Turn off your POD.
Procedure:
1 Press and hold the Power and PTT buttons simultaneously until the blue LED blinks.
2 Remove the POD from the paired device list on the compatible device if the POD has been
paired before.
3 Pair the POD from the compatible device.
2.5

Entering or Exiting Dark Mode

Dark Mode allows you to turn off the LEDs of a wireless device.
Prerequisites:Turn on the device.
Procedure:
Toggle the device in or out of Dark Mode by pressing the Power and MFB buttons
simultaneously until the blue and green LED blink twice.
The POD plays a tone or voice prompt to alert you that the LEDs are turned off.
The wireless device does not show LED indication for the following functions when pressing the Power
button:
• Lost Link
MN007883A01-AA
Chapter 2: Getting Started
9