Audio Recording - Wiseup F9100 Guia Del Usuario

All manuals and user guides at all-guides.com
3.2.1. Power on the camera by pressing the Power Button once. The camera will vibrate
for 1 second. Both red and blue indicator lights will be illuminated for 3 seconds, then the
blue indicator light will turn off while the red one will stay illuminated, indicating the
camera has entered into standby mode automatically.
3.2.2. Wait 10 seconds. Then press the Power Button once to start video recording. The
red indicator light will keep flashing and the camera will vibrate once.
3.2.3. Press the Power Button once again to stop video recording. The camera will vibrate
once and the red indicator light will stay illuminated, indicating the camera is back to
standby mode.
[Note]:
1). A video clip will be generated and saved every 5 minutes automatically.
2). The camera can record video for 80 minutes continuously on a full charge.
3). Each video clip will take up about 805MB storage space of the Micro SD card.
4). Video Resolution: 1920x1080P Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button once. The camera will vibrate
for 1 second. Both red and blue indicator lights will be illuminated for 3 seconds, then the
blue indicator light will turn off while the red one will stay illuminated, indicating the
camera has entered into standby mode automatically.
3.3.2. Press the Mode Button once to enter into still photograph mode. The camera will
vibrate for 1 second. The red indicator light will turn off and the blue indicator light will
remain solid.
3.3.3. Press the Power Button once to take a photo. The camera will vibrate once and the
blue indicator light will flash once.

3.4. AUDIO RECORDING

3.4.1. Power on the camera by pressing the Power Button once. The camera will vibrate
for 1 second. Both red and blue indicator lights will be illuminated for 3 seconds, then the
blue indicator light will turn off while the red one will stay illuminated, indicating the
camera has entered into standby mode automatically.
3.4.2. Press the Mode Button once to enter into still photograph mode. Press the Mode