Wiseup F9100 Guia Del Usuario página 4

All manuals and user guides at all-guides.com
Button again to enter into audio recording mode. Both red and blue indicator lights will
remain solid.
3.4.3. Press the Power Button once to record audio only. The red indicator light will start
flashing.
3.4.4. Press the Power Button once again to stop audio recording. The red indicator light
will stop flashing and remain solid with the blue one.
[Note]:
1). A video clip will be generated and saved every 15 minutes automatically.
2). Audio Format: WAV
3.5. IR NIGHT VISION
When the camera is recording video or is ready to take a picture, hold down the Mode Button
for 1 second to turn on the IR LEDs. The camera will vibrate for 1 second and the yellow
indicator light will come on and remain solid. Press and hold the Mode Button for 1 second
again to turn off the IR LEDs and the yellow indicator light will turn off.
IV. Video/Image/Audio File Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
4.2. Insert the card reader into a proper PC computer USB port.
4.3. The camera will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. The camera will be recognized as a removable disk drive.
5.4. Click on the drive in the root directory and inside the root directory, open the file
named "timerset.txt".
5.5. Write the current date and time in the "timerset.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS Y (For example: 2017.04.12 14:24:32 Y). If you don't need the
time and date stamp on the video footage, you can add an "N" in the "timerset.txt" file.
(For example: 2017.04.12 14:24:32 N). Save this file.