Before Use - Nosiboo GO Manual Del Usuario

DON'T!

4. Before use

1. Charging the device
a) Attach the charging cable to the
connector situated at the back
of the device housing
b) Plug the other end of the charger
into a 100-240V AC outlet.
Charging is in process if the LED
indicator on the charger is red.
Charging is complete once the
light turns green.
2. Assembling the Penguin head
a) Clean and dry the parts of the
Penguin head.
The device is intended to be used only for
removing nasal discharge from a child's
nose. It shall not be used for any other
purposes.
Penguin head part A
Penguin head part B
!
WARNING
Nose tip
13