Cleaning And Maintenance; Disposal Of Packaging And Products - Auping K2 Manual De Instrucciones

All manuals and user guides at all-guides.com

6. Cleaning and maintenance

Remove stains on the mesh base with a damp
cloth and gentle cleaning agent. Never use a
scouring sponge or scouring agents.
Dust the mesh base and leg frame occasionally.
As part of Auping's commitment to caring for
the environment all metal parts have a powder
lacquer coating instead of a wet-lacquered
surface. Some of this coating material can
drop off underneath the bed during the first
weeks of use. This is harmless and can easily
be removed.
GB18
_006IH_3114 BW.pdf - pag.18
7. Disposal of packaging
and product
Every year Auping invests in cleaner produc-
tion processes and tries to save the environ-
ment as much as possible by using durable
materials. All mattresses are constructed of
CFC-free materials. The mattress is manufac-
tured in such way that no unnecessary waste
is created. The mesh bases are constructed
of galvanised steel, a material which is excep-
tionally well-suited for recycling.
Removal
Make sure that the mesh base cannot fall open
during transport - by lashing the subframe and
upper frame together, for example. Do not
remove any screws from the mesh base.
Please take care!
When disassembling the head end side of the
motor from the axle whilst the back section is
in a raised position, it may drop down on the
base frame; please let a second person hold it
in position.
Safe waste disposal
The frame of the mesh base is constructed of
a highly sprung tension mesh. Do not saw
through the frame; do not weaken or impair
the frame in any way.
The packaging is made up of cardboard and
polyethylene film (PE). Please dispose of these
materials in a responsible way in accordance
with the regulations of your local authority.
LET OP !!! Lage resolutie!
November 9, 2007