Publicidad
STEP 8
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully position the unit on it's front. Position the back panel as
shown, flush the bottom edge of the back panel with bottom edge of the bottom (D). Align squarely
and nail (8) straight into back edges as shown
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
All manuals and user guides at all-guides.com
8
(x42)
#A21110
Raw Surface
B
WARNING
Please make sure that the Backs are attached securely.
All nails must be driven into the parts straight and
tightened firmly. Failure to do so could cause instability,
product collapse, and/or serious injury.
K
Flush edge of back panel with
edge of bottom.
14
8
D
You
Tube
Publicidad
