General Safety Precautions; Precautions When Working With Batteries - Fullwat PDA500SS Manual Del Usuario

1. IMPORTANT SAFETY INFORMATION
Warning
Before installing and using the inverter, you need to read the following safety information carefully.

1.1 General safety precautions

1.1.1 Do not expose the inverter to rain, snow, spray, bilge or dust.
To reduce risk of hazard, do not cover or obstruct the ventilation openings.
Do not install the inverter in a zero-clearance compartment, may result in overheating.
1.1.2 Do avoid a risk of fire and electronic shock. Make sure that existing wiring is in good electrical condition; and that wire size is not
undersized. Do not operate the inverter with damaged or substandard wiring.
1.1.3 This equipment contains components which can produce arcs or sparks. To prevent fire or explosion, do not install in
compartments containing batteries or flammable materials or in locations where require ignition protected equipment,
this includes any space containing gasoline-powered machinery, fuel tanks, or joints, fittings, or other connection between
components of the fuel system.

1.2. Precautions when working with batteries

1.2.1 If battery acid contacts skin or clothing, washes immediately with soap and water. If acid enters eye, immediately flood eye
with running cold water for at least 20minutes and get medical attention immediately.
1.2.2 Never smoke or allow a spark or flame in vicinity of battery or engine.
1.2-3 Do not drop a metal tool on the battery. The resulting sparks or short-circuits on the battery of other electrical part may cause
an explosion.
1.2.4 Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-
acid battery produces a short-circuit current high enough to weld a ring or the like to metal, causing a severe burn.
2. FEATURES
• Pure sine wave output ﹙THD<2%﹚.
• Adopts RS485 communication interface, the remote control distance can reach more than 1000m.
• Reverse polarity controlled by MOS, without fuse burt.
• Parameters can be set according to different usage.
• Input & output completely isolated design.
• LCD displays operation status, and error condition.
• Capable of driving inductive & capacitive loads at the start moment.
• Loading and temperature controlled the cooling fan.
• Built in advanced microprocessor to make friendly interface with user.
• Flame retardant and environment friendly material.
• Protection: input low voltage alarm & shutdown, overload, short circuit, input over voltage, over temperature.
• USB output port 5V2.1A.
3. Mechanical drawing
Pure sine wave inverter
500W/700W
Pure sine wave inverter
1200W
78,6
113,3
- 12 -
270,6
261,8
284,1
362,3
340,3
7,0
5,2
15,2
8,8