Troubleshooting Guide - Schönes Bauen Champagne Manual Del Usuario

During operations, if there is an error, please check the following table before
calling for service.
PHENOMENON
Insert the plug into the socket
and press ON/OFF, no "beep"
sound
The unit send out
"beep"
Error E0
Error E1
Error E2
Error E3
Error E4
Error E5
Error E6
Error E7
Error EC
The remedies are only for the first check of any error code, having any of these
errors unplug the unit immediately and can contact the service center.
To avoid danger and damage, do not disassemble or repair by yourself or anyo-
ne other than the authorised technician.
16

Troubleshooting Guide

PUNTOS DE COMPROBACION
If the plug real plugged in
If the cookware is inapplicable
If the cookware bottom diameter
over 12cm
Improper cooking utensil.
Voltaje <80V
Voltaje >145V
Top glass overheat
Glass sensor open circuit
PCB IGBT overheat
Glass sensor short circuit
Control board problem
Light board problem
REMEDY
Check carefully. Any help
please contact service center
Replace a correct cookware
Replace a cookware bottom
diameter over 12cm
Put or replace a correct cookware
Call service center for help
Call service center for help
Re- start after it turns cool
Call service center for help
Re- start after it turns cool
Call service center for help
Call service center for help
Call service center for help