Annex; Bypass Damper Assembly; Annul Damper For Motorized Adapters - Airzone ZS6 Manual Del Usuario

ANNEX

BYPASS DAMPER ASSEMBLY

Sharply hit it to take away the pre-cut area of the sides corresponding to the bypass.
Use a sharp blade to remove the insulation that covers the area of the bypass and uncover the mounting slots on the
bypass.
Fit the bypass damper in the slots and rotate it clockwise until the stop.
Attach the bypass damper to the plenum using a sheet metal screw (Ø3.9 mm).

ANNUL DAMPER FOR MOTORIZED ADAPTERS

Check the gate that is going to be annulled is closed.
Switch off the actuator.
Put the sealing lid at the gate as shown in the picture.
ES
EN
FR
IT
PT
DE
37