Included Components; Rack-Mount Installation - Shure AXT620 Manual Del Usuario

AXT620 Ethernet Switch
The AXT620 Ethernet Switch is a rugged, rack-mountable 9-port switch that simplifies the networking of Shure systems and minimizes network con-
figuration setup. It is equipped with Power over Ethernet (PoE) ports for enabled devices and a DHCP server to automatically assign IP addresses to
components.
Features
• Rugged 1RU construction
• Internal power supply
• 8 rear panel ports, 4 of which have Power over Ethernet (PoE)
• Front panel port
• On-board DHCP server
• Easy system integration
Front and Rear Panel
1
AXT620
LINK 100Mb
Ethernet
Switch
10/100Mb
AXT620 Ethernet Switch
Made in Taiwan
Input: 100-240 V~ 50/60Hz 2A max.
5
① RJ-45 Ports
One 10/100 N-way auto-sensing for 10Base-T or 100Base-TX
connections.
② Front Panel LED Indicators
Link
• Green: Connected to network
• Blinking: Networking is active
• Off: Not connected to network
100Mb
• Amber: The port is operating at speed of 100 Mb
• Off: The port is disconnected or not operating at speed of 100 Mb
PoE
• Amber: The port is suppling power to the connected PoE device
• Off: No powered device attached
③ DHCP Switch
Turns the DHCP server ON or OFF (Left side = On, Right side = Off)
④ Power
• Green: Power on
• Off: No AC power applied
⑤ Power cord socket
The switch will work with AC in the voltage range of AC 100-240V
with frequency of 50-60Hz.
Power On
Connect the power cord to the power socket on the rear panel of the
switch.
4
All manuals and user guides at all-guides.com
3
2
LINK
LINK
100Mb PoE ON OFF
1 2 3 4 5 6 7 8 DHCP
10/100 10/100 & PoE
LINK 100Mb
1 2 3
10/100 Ethernet

Included Components

• (1) PoE Managed Switch
• (4) Rubber footpads
• (1) Ethernet cable (10 ft.)
• (1) Rack-mount kit
• (1) Power Cord
8
Model Name: SHURE AXT620
LINK PoE
MAC: 0011FC059C60
7
4 5 6
10/100 Ethernet W/PoE
S/N: 65770110100015
6
⑥ RJ-45 Ports
Eight 10/100 N-way auto-sensing for 10Base-T or 100Base-TX
connections. Ports 5-8 also can supply power over Ethernet to
enabled-devices.
⑦ Rear Panel LED Indicators
Link (port 1 ~ 8)
• Green: Connected to network
• Blinking: Networking is active
• Off: Not connected to network
100Mb (port 1 ~ 4)
• Amber: The port is operating at speed of 100 Mb
• Off: The port is disconnected or not operating at speed of 100 Mb
PoE (port 5 ~ 8)
• Amber: The port is suppling power to the connected PoE device
• Off: No powered device attached
⑧ System information sticker
Displays the MAC address.
⑨ Reset button
Reboots the system. If you press the Reset button for over five
seconds, the system will reset to factory defaults.

Rack-mount Installation

For proper ventilation, allow about at least four inches (10 cm) of clear-
ance on the front and 3.4 inches (8 cm) on the back of the switch. This is
especially important for enclosed rack installation.
4
POWER
R E S E T
7 8
9