Video Source; Call Transfer - PNI SafeHome PT720MW Manual De Usuario

Notes:
During a conversation, you will not be able to press the button Monitor
the video source.
During a conversation, if a call comes in from another connected camera, the indoor unit
will emit a "du .. du .. du .." warning sound.

Video source

Press the key Monitor
DOOR1 - will display the image taken by the camera connected to the input
DOOR1
CAM1 - will display the image taken by the camera connected to the input CAM1
DOOR2 - will display the image taken by the camera connected to the input
DOOR2
CAM2 - will display the image taken by the camera connected to the input
CAM2
STANDBY - the date and time will be displayed on the screen for a few seconds,
after which the monitor will turn off.
Note: If you have connected only one camera, you can deactivate the other outputs in
the setup menu.

Call transfer

This function requires at least two indoor units and one outdoor unit, connected to
each other.
1. The visitor presses the call button on the external unit.
2. The image taken by the camera immediately appears on the monitor.
3. Long press the button Transfer call
screen:
13
to change the video source:
2 3 4 5
until the icons below appear on the
6
to change
User manual