Nemaxx GVF120 Manual Del Usuario página 4

v02 • 08.08.2017
EN
Point holder assembly
Screw one side of the clamping plate with the sideward
socket screws.
Fixture on the glass
Place both point supports and glass mountings on the glass
as shown in the illustration on the left.
Place the sealing lips on the clamping plates and the spacers
between them (see illustration on the left).
Fix the counterpart of the clamping plate on the opposite
side.
Note: Do by no means forget to place sealing lips!
Mounting the wall anchoring
Screw the lower wall brackets into the lower drill holes.
4