V
M
IeWInG
ode
Indicator Description
how to use the indicator
a b cd
a Signal Indicator
The signal indicator shows the strength of the signal being received from the
camera.
The number of bars in the signal indicator shows the strength of the signal –
One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.
b Camera Number
Indicates which camera is being displayed on the current screen. When scan mode
is selected, this icon will flash.
c x2 Zoom mode
Indicates that current screen is Zoomed in. Use the four directional buttons to
pan the camera. Select x1 in the menu to zoom back out.
d Night Vision Indicator
Indicates camera night vision mode is turned on.
The screen will appear in Black/White in this mode.
8 · Viewing Mode Display
SEW-3037W-ENGLISH.indd 8
All manuals and user guides at all-guides.com
d
Isplay
e
f h i j
g
e digital Clock
Displays the time that is set on the monitor. It only provides AM / PM time
format and no 24hour format.
f Night light
Indicates the night light is on.
g Monitor Speaker Mute
Indicates the monitor speaker is muted. Once the monitor's speaker is muted,
no sound from the camera is produced.
h Vox on
Indicates the Power / VOX slide switch position is set at "Vox" mode.
i Battery Capacity Level
Indicates remaining battery charge. Indicated in 4 levels, and one discharge
warning.
j Charging
Indicates the battery is charging by DC input power. If battery nearly empty,
it will flash to alert user to charge up the unit.
No Signal Warnings
The "out of range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
Menu Operation
how to use the setup buttons
Press the [MeNu] button of the monitor to display the menu screen.
Use [$/%/_/+] button to traverse the menu, and press [
changes.
] button to apply the
2012-09-03 오전 11:37:17